The ultra-compact EASYCUT 40 is an 8 kg plasma cutter with a non-HF starting voltage, making it perfect for cutting all types of metal up to 20 mm thick. With an output power of 40 A, it is excellent for precise cutting using a low current. This device is ideal for workshops or auto body shops thanks to its portability and excellent cutting performance.
EFFECTIVE
– Its inverter technology ensures cutting quality on all types of steel
(soft, stainless, hard and high tensile), aluminum and copper, etc.
– Quick and easy to set up consumables.
ERGONOMIC CUTTING LAMP
– Efficient cutting: the torch body is air-cooled for a more stable arc and a high duty cycle.
– Equipped with an ergonomic handle for comfort and ease.
– Designed to be shock and heat resistant.
– Connect and disconnect the flashlight quickly without using any tools.
SIMPLE TO USE
– Intuitive control panel.
– Manual air pressure adjustment (2.5 < 6.5 bar) with a chart on the front panel.
– Automatically detects cutting torch.
– HF-free ignition prevents interference that could damage nearby electronics.
|
Supplied with:
– Earth clamp (ground clamp) (2 m, 10 mm²) – TPT40 cutting torch (4 m) |
| EFFICIENCY | |
| Capacity | Thickness |
| Separate | |
| Fe | 20 mm |
| Al/CrNi | 15 mm |
| Cut cleanly | |
| Fe | 15 mm |
| Al/CrNi | 10 mm |
SAFE
Built-in protection:
 |
Protected against over voltage and over current. |
 |
Indicates when air pressure is insufficient or when a cutting torch is detected |
USER FRIENDLY
– Reinforced structure with insulating, anti-slip rubber pads.
– HMI protective cover.
– The soldering iron and ground clamp (ground clamp) can be disconnected.
– Compact, lightweight and portable.
|
A |
A |
 |
Air system | EN60974-1
(40°C) |
 |
 |
IP |
||||
|
Cut cleanly |
Separate |
|||||||||||
| Fe | Al/CrNi | Fe | Al/CrNi | Pressure (bar) | L/min | X(40oC) | cm | kg | ||||
| 230V 1~ | 16A | 10÷40A | 15 | 10 | 20 | 15 | 2.5 ÷6.5 | 115 | 10A @ 60%
40A @ 20% 60% |
42x15x30 | 8 | IP 21 |
Reviews
There are no reviews yet.